Barrel Length: 20”
Barrel Material: Teflon Coated 416R Stainless Steel
Barrel Profile: A2 Style
Chamber: 6.5 Creedmoor
Twist Rate: 1 in 8”
Gas System: Rifle-Length
Gas Block Type: Low-profile 5 position click switch adjustable gas block
Upper Receiver: Forged 7075 T6 Aluminum
Receiver Style: PA10 Flat top with Feed Ramps
Receiver Finish: PSA Custom Teflon Coated
Forward Assist: Yes
Dust Cover: Yes
Handguard Type: PSA Custom 15″ Slim-line MLOK
Bolt Carrier Group: 6.5 Creedmoor Laser Engraved BCG w/ extra power extractor spring
Staked Gas Key: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: PSA Custom Finish, Teflon-based
Fire Control Group: PSA Custom 3.5lb Flat Bow Drop-in FCG
Buffer Tube: 7075 T6 Aluminum
Adjustment: 6-position telescoping stock
Stock: Magpul Carbine
Grip: Magpul MOE
Safety: PSA Custom Ambi Safety
Magazine: 20 Round PMAG
The Palmetto State Armory PA10 Gen3 features a forged receiver set that has been designed with a relief cut geometry to allow the use of a wider variety of aftermarket bolt carrier groups. A carbine length buffer tube with a short, heavy buffer coupled with a standard PA10 buffer spring. All Gen3 PA10 rifles from Palmetto State Armory come equipped with a Toolcraft BCG, which ensures thousands and thousands of rounds will feed through the rifle.
Barrel: The dimpled, Teflon-Coated 416R Stainless Steel, 6.5 Creedmoor 1/8 twist, Rifle-length gas system upper is paired with a Palmetto State Armory 15″ M-Lok free-float rail, low profile adjustable click detent 5 position gas block, and a Custom Series AR10/LR308 .308 Short Muzzle Brake device. The gas system is enhanced with a nitrided gas tube in order to better resist high heat and corrosion.
Upper: Precision machined from forged 7075-T6 aluminum, then coated with a hard as nails Teflon based finish in our PSA Custom shop. With enhanced dual retention anti-slip and anti-rotating handguards.
Bolt Carrier Group: Tool craft 9310 steel bolt assembly with extra strength extractor springs that is nitride for increased durability. 8620 carrier, nitride treated, with a nitride treated gas key properly staked with grade 8 fasteners. A 7075 T6 aluminum charging handle is also included.
Lower: Precision machined from forged 7075-T6 aluminum, these lowers are then coated with a hard as nails Teflon based finish in our PSA Custom shop. With a PSA Custom 3.5lb Flat Bow Fire Control Group, a Magpul MOE Stock, PSA Custom Ambi Safety, and a Magpul MOE Grip. This is an ideal platform for the 6.5 Creedmoor cartridge.
The Palmetto State Armory Custom Series line of accessories, components, and firearms are designed to give you the tactical or competitive advantage when you need it most!
There are no reviews yet.